New-patented technology makes it easy to install economical devices to provide instant hot water for all household faucets and showers. This new technology uses existing water pipes and the thermal convection generated by the water heater to circulate the water back to the water heater for reheating (not requiring a water pump or any electricity). These hot water recirculation systems have a temperature-controlled valve that allows the consumer to easily adjust the temperature control knob to meet their particular needs. There is no water waste, and it also minimizes energy waste since it only re-circulates water when the hot water cools below the adjustable temperature setting. Installation is a simple DIY 15-minute project (not requiring any pipe cutting, soldering, a water pump or electrical connections).
Installing just one of these eco-friendly units in the proper location can save thousands of gallons of water a year. Most homes and buildings are plumbed in series (pipes running from one fixture, to the next fixture, to the next room…). Installing the patented eco-friendly Hot Water Lobster Instant Hot Water Valve on (or near) the last fixture in your home will provide faster hot water to all the fixtures along the plumbing run (known as a plumbing loop). In the event you home or building has more than one plumbing loop, it is likely that you will need to place an instant hot water valve at (or near) the end of each additional plumbing loop. Since the instant hot water valve uses your existing cold water lines as the return line, a separate (or dedicated) return line is not necessary, so installation has really been simplified.
Beyond saving money on water bills and helping to save the environment by not wasting as much water, these instant hot water valves have other benefits. If you live in an area where it drops well below freezing, the instant water valve circulates the tepid water, which prevent pipe freezing. The circulating tepid water also helps reduce condensation build up on pipes and toilet basins. It also reduces condensation on pipes and toilets, which can corrode them over time.
As new-technology evolves (simplifying installation) there is a strong demand for these instant hot water valves by everyone who not only wants to preserving our environment by saving water and saving energy, but also wants long term save savings on their utility costs. Which all translates to a unique opportunity to inexpensively start your new business selling and/or installing instant hot water valves.
Prevent Your Pipes From Freezing:
The best solution to preventing your pipes from freezing is to simply install innovative and patented technology known as a “temperature controlled hot water recirculating valve” (is a breeze-no pipe cutting, soldering or electrical connections). It uses your existing water pipes and the thermal convection generated by your water heater to circulate the water back to your water heater for reheating (not requiring a pump or any electricity). These systems are temperature-controlled and are easily adjustable to meet your particular temperature needs. There is no water waste and it also reduces the energy required to heat your water while it provides instant hot water to your faucets and showers. A trickle of water circulating in your pipes will keep your pipes from freezing in most circumstances.