The Water Conservation Business Is Ripe For Small Business Startups

Water conservation has become an essential practice in all regions, even in areas where water seems abundant. In addition to saving money on your utility bill, water conservation helps prevent water pollution in nearby lakes, rivers and local watersheds.

Conserving water can also extend the life of your sewer system and septic system by reducing soil saturation, and reducing pollution into the watershed. Overloading municipal sewer systems can also cause untreated sewage to flow to lakes and rivers. The smaller the amount of water flowing through these systems, the lower the likelihood of pollution. In some communities, costly sewage system expansion has been avoided by community wide household water conservation.

Water conservation comes naturally when everyone in the family is aware of its importance, and parents take the time to teach children some of the simple water-saving methods around the home, which combined with other households and businesses can make a big difference.

In 1990, 30 states in the US reported ‘water-stress’ conditions. In 2000, the number of states reporting water-stress rose to 40. In 2009, the number rose to 45. There is a worsening trend in water supply nationwide. Taking measures at home to conserve water not only saves you money, it also is of benefit to the greater community.

Saving water at home does not require any significant cost outlay. Although there are water-saving devices and water conservation systems such as rain barrels, drip irrigation and hot water re-circulation valves, the bulk of water saving methods can be achieved at little cost. For example, 75% of water used indoors is in the bathroom, and 25% of this is for the toilet. The average toilet uses 4 gallons per flush (gpf). You can invest in a ULF (ultra-low flush) toilet, which will use only 1.6 gpf. But you can also install a simple tank bank, costing about $2, which will save .8 gpf. This saves 40% of what you would save with the ULF toilet. Using simple methods like tank banks, low-flow shower heads and faucet aerators you can also help retrofit your home for under $50.

By using water-saving features you can reduce your in-home water use by 35%. This means the average household, which uses 130,000 gallons per year, could save 44,000 gallons of water per year. On a daily basis, the average household, using 350 gallons per day, could save 125 gallons of water per day. The average individual, currently using 70 gallons per day, could save 25 gallons of water per day.

The best solution to save water (saving energy and prevent pipe freezing) is to simply install innovative and patented technology known as a temperature controlled hot water recirculating valve (is a breeze-no pipe cutting, soldering or electrical connections) for your customers. The eco-friendly Hot Water Lobster Instant Hot Water Valve uses your existing water pipes and the thermal convection generated by your water heater to circulate the water back to your water heater for reheating (not requiring a pump or any electricity). These hot water re-circulation systems are temperature-controlled and are easily adjustable to meet your particular temperature needs. There is no water waste and it also reduces the energy required to heat your water while it provides instant hot water to your faucets and showers. A trickle of water circulating in your pipes will keep your pipes from freezing in most circumstances.

Finally, it should be noted that installing low-flow aerators, shower heads, tank banks and other water-saving devices for your customers is usually a very simple operation which can be done by anyone and does not even require the use of tools. Water conservation is one of the easiest measures to put in place, and saving water should become part of everyday family practice.

Prevent Your Pipes From Freezing:

The best solution to preventing your pipes from freezing is to simply install innovative and patented technology known as a “temperature controlled hot water recirculating valve” (is a breeze-no pipe cutting, soldering or electrical connections). It uses your existing water pipes and the thermal convection generated by your water heater to circulate the water back to your water heater for reheating (not requiring a pump or any electricity). These systems are temperature-controlled and are easily adjustable to meet your particular temperature needs. There is no water waste and it also reduces the energy required to heat your water while it provides instant hot water to your faucets and showers. A trickle of water circulating in your pipes will keep your pipes from freezing in most circumstances.

This entry was posted in Environmental and tagged , , , , , , , , , , , , , , , , . Bookmark the permalink.

Leave a Reply