Consider that gradually over the years a lot of things have changed. For instance, gone are the days when running your faucets wide-open produced flows of 10-gallons per minute. Over time water has become much more valuable, and measures have been put in place to conserve water. These days most faucets fixtures have flow restrictions to reduce water consumption. Showers now provide a maximum output of only about 1.5 gallons per minute and the bathroom sinks only about ¾ gallon per minute.
Years ago it was common in expensive homes to find hot water circulating systems that provided the home owner with instant hot water at any fixture in the house. The plumber would run the hot water piping in a loop from the water heater outlet to a fixture and from that fixture to the next and so on until he reached the last fixture. From the last fixture he would run a pipe back to the inlet of the water heater where a pump and check valve were located.
The pipe from the last fixture back to the water heater is known as a dedicated return line. There would be a pump located either at the water heater outlet or at the return line at the water heater inlet, that would circulate the hot water through the hot piping, keeping hot water in the piping all of the time. That way when ever a hot water tap was turned on there would be instant hot water.
Instant hot water is wonderful, but now days this type of system would be expensive. With the full time circulating system you not only pay for the heat energy being lost from the plumbing, but also you pay for the energy to run the pump all the time.
A nice side benefit of instant hot water is the conservation of water. You don’t run thousands of gallons per year of water down the drain waiting for hot water to arrive at your faucet.
Considering the rising costs of both energy and water these days, new technology has came to the rescue. This innovative eco-friendly and patented technology is known as the Hot Water Lobster Instant Hot Water Valve. It uses your existing water pipes and the thermal convection generated by your water heater to circulate the water back to your water heater for reheating (not requiring a water pump or any electricity). This hot water recirculation system has a temperature-controlled valve that allows the consumer to easily adjust the temperature control knob to meet their particular needs. There is no water waste with this type of system, and it also minimizes energy waste since it only re-circulates water when the hot water at your faucet cools below your desired temperature. As an added benefit, it can prevent pipe freezing. Installation is a simple DIY, 15-minute project (not requiring any pipe cutting, soldering, a water pump or electrical connections).
Selling and/or installing hot water recirculating valves can be financially rewarding as well as ethically rewarding…knowing that your are helping your customers save our natural resources. It’s easy to get started. Simply contact any of the hot water recirculating valve manufacturers for more information and wholesale pricing.
Prevent Your Pipes From Freezing:
The best solution to preventing your pipes from freezing is to simply install innovative and patented technology known as a “temperature controlled hot water recirculating valve” (is a breeze-no pipe cutting, soldering or electrical connections). It uses your existing water pipes and the thermal convection generated by your water heater to circulate the water back to your water heater for reheating (not requiring a pump or any electricity). These systems are temperature-controlled and are easily adjustable to meet your particular temperature needs. There is no water waste and it also reduces the energy required to heat your water while it provides instant hot water to your faucets and showers. A trickle of water circulating in your pipes will keep your pipes from freezing in most circumstances.