Domestic Water Conservation Review

In 1990, 30 states in the US reported ‘water-stress’ conditions. In 2000, the number of states reporting water-stress rose to 40. In 2009, the number rose to 45 and is expected to hit 49 in this year. There is a worsening trend in water supply nationwide. Taking measures at home to conserve water not only saves you money, it also is of benefit to the greater community.

Saving water at your customer’s homes does not require any significant cost outlay. Although there are water-saving appliances and water conservation systems such as rain barrels, drip irrigation and on-demand water heaters which are more expensive, the bulk of water saving methods can be achieved at little cost. For example, 75% of water used indoors is in the bathroom, and 25% of this is for the toilet. The average toilet uses 4 gallons per flush (gpf). You can invest in a ULF (ultra-low flush) toilet which will use only 2 gpf. But you can also install a simple tank bank, costing about $2, which will save .8 gpf. This saves 40% of what you would save with the ULF toilet. Using simple methods like tank banks, low-flow showerheads and faucet aerators you can retrofit your home for under $50.

By using water-saving features you can reduce your in-home water use by 35%. This means the average household, which uses 130,000 gallons per year, could save 44,00 gallons of water per year. On a daily basis, the average household, using 350 gallons per day, could save 125 gallons of water per day. The average individual, currently using 70 gallons per day, could save 25 gallons of water per day.

When buying low-flow aerators, be sure to read the label for the actual ‘gpm’ (gallons per minute) rating. Often, the big box retailers promote “low-flow” which are rated at 2.5 gpm, which is at the top of the low-flow spectrum. This may be needed for the kitchen sink, but we find that a 1.5 gpm aerator works fine for the bathroom sink and most water outlets, delivering the same spray force in a comfortable, soft stream.

The average family can waste over 17,000 gallons of fresh water each year while it runs down the drain as you wait for hot water to arrive (according to G.A.M.A. statistics). Install innovative and patented technology known as a “temperature controlled hot water recirculating valve” (is a breeze-no pipe cutting, soldering or electrical connections). It uses your existing water pipes and the thermal convection generated by your water heater to circulate the water back to your water heater for reheating (not requiring a pump or any electricity). To save hot water and save energy the Hot Water Lobster Instant Hot water Valve in an eco-friendly hot water recirculating systems is temperature controlled and easily adjusts to meet your particular temperature needs. These devices not only save hot water, there is no water waste and they also reduces the energy required to heat your water while it provides faster hot water to your faucets and showers for better water conservation.

Finally, it should be noted that installing low-flow aerators, showerheads, tank banks and other water-saving devices usually is a very simple operation which can be done by the homeowner and does not even require the use of tools. Water conservation at home is one of the easiest measures to put in place, and saving water should become part of everyday family practice.

This entry was posted in Environmental and tagged , , , , , , , , , , , , , , , , . Bookmark the permalink.

Leave a Reply